Sponge Media™

Sponge-Jet has engineered a line of composite abrasives, incorporating the best abrasives or micro-abrasive particles within high-performance synthetic sponge. The diverse range of recyclable composites provide superior results for aggressive profiling and abrading or delicate cleaning on highly sensitive substrates. The synthetic sponge captures up to 95% of the contaminants, reducing fugitive emissions through its MicroContainment™ feature.

19 Item(s)

  • sm_blue

    Blue Sponge Media™

    Part #: SJM-B

    Non Aggressive

    This Sponge Media product is designed for contaminant removal and absorption without the presence of moisture and without collision energy damage to delicate substrates.

    Read more
  • sm_garnet3060

    GMA Garnet Sponge Media™

    Part #: SJM-GMA-GAR-3060

    Moderately Aggressive

    This value-oriented Sponge Media product provides reduced recyclability, making it a better choice where full media recovery is not possible.

    Read more
  • Green Sponge Media™

    Green Sponge Media™

    Part #: SJM-G

    Lightly Aggressive

    This Sponge Media product is designed for contaminant removal and absorption without the presence of moisture.

    Read more
  • sm_red-g40

    Red G-40 Sponge Media™

    Part #: SJM-R-40

    Highly Aggressive

    This Sponge Media product is typically selected when deep removal by impact is more important than abrading; such as heavy packed (Grade D) rust and pitting.

    Read more
  • sm_silver120

    Silver 120 Sponge Media™

    Part #: SJM-S-120

    Moderately Aggressive

    This Sponge Media product is for light industrial surface preparation where selective coating and corrosion removal is required and where minimal profile is specified.

    Read more
  • sm_silver16

    Silver 16 Sponge Media™

    Part #: SJM-S-16

    Highly Aggressive

    This is the third most commonly used Sponge Media for industrial coating removal and surface preparation. Silver 16 Sponge Media is ideal when a very coarse, angular profile is specified for the coating that is to be applied.

    Read more
  • sm_silver220

    Silver 220 Sponge Media™

    Part #: SJM-S-220

    Lightly Aggressive

    This Sponge Media product is for sensitive industrial surface preparation, the resurfacing of existing coatings or delicate substrate treatment.

    Read more
  • Silver 30 Sponge Media™

    Silver 30 Sponge Media™

    Part #: SJM-S-30

    Highly Aggressive

    This is the most commonly used Sponge Media for industrial coating removal and surface preparation. Silver 30 Sponge Media is ideal when a coarse angular profile is specified for the coating that is to be applied.

    Read more
  • sm_silver30dg

    Silver 30DG Sponge Media™

    Part #: SJM-S-30DG

    Highly Aggressive

    The fine particle size of this Sponge Media product allows for more uniform treatment of detailed surfaces and increased production. Silver 30DG Sponge Media™ abrasive recyclability is lower; ricochet and dust are more pronounced compared with standard Sponge Media products.

    Read more
  • sm_silver320

    Silver 320 Sponge Media™

    Part #: SJM-S-320

    Lightly Aggressive

    This Sponge Media product is for sensitive industrial surface preparation, the resurfacing of existing coatings or delicate substrate treatment.

    Read more
  • sm_silver320dg

    Silver 320DG Sponge Media™

    Part #: SJM-S-320DG

    Lightly Aggressive

    The fine particle size of this Sponge Media product allows for more uniform treatment of detailed surfaces and increased production. Media recyclability is lower; richochete and dust are more pronounced compared with standard Sponge Media products.

    Read more
  • sm_silver320dg-glass

    Silver 320DG/Glass 60/80DG Sponge Media™

    Part #: SJM-S-320DG-GL-6080DG

    Lightly Aggressive

    This Sponge Media product is specifically designed to increase productivity, to remove or resurface light industrial coatings or to prepare new steel where a low-build coating system is specified.

    Read more
  • sm_silver500

    Silver 500 Sponge Media™

    Part #: SJM-S-500

    Lightly Aggressive

    This Sponge Media product is for HIGHLY sensitive industrial surface preparation or for the resurfacing of existing coatings. It provides maximum, delicate substrate treatment while still attaining ISO / NACE / SSPC cleanliness grades.

    Read more
  • sm_silver60

    Silver 60 Sponge Media™

    Part #: SJM-S-60

    Moderately Aggressive

    This Sponge Media product is the 2nd most commonly used for industrial coating removal and surface preparation. It is ideal when a moderate, angular profile is specified for the coating to be applied.

    Read more
  • sm_silver60dg

    Silver 60DG Sponge Media™

    Part #: SJM-S-60DG

    Moderately Aggressive

    The fine particle size of this Sponge Media product allows for more uniform treatment of detailed surfaces and increased production. Media recyclability is lower; ricochet and dust are more pronounced compared with standard Sponge Media products.

    Read more
  • sm_silver80

    Silver 80 Sponge Media™

    Part #: SJM-S-80

    Moderately Aggressive

    This Sponge Media product is for industrial coating removal and surface preparation. Slower than Silver 60 Media abrasive but suitable when the specified profile must be below 50 microns (2 mils).

    Read more
  • sm_white-glass-bead

    White Glass Bead Sponge Media™

    Part #: SJM-GL-6080

    Lightly Aggressive

    This Sponge Media product is for the preparation of soft alloys and a low-build coating system is specified.

    Read more
  • sm_whiteplastic

    White Plastic Sponge Media™

    Part #: SJM-WP-3040

    Lightly Aggressive

    White Plastic Sponge Media™ is designed to remove an applied coating without etching/profiling steel or aluminum substrates.

    Read more
  • White SPOCC Sponge Media™

    White SPOCC Sponge Media™

    Part #: SJM-SPOCC

    Lightly Aggressive

    This Sponge Media product is designed to remove contaminants without high surface impact energy and damage.

    Read more