Superior Preparation — Increases Coating Life

According to the NACE International 75% of coating failures are the result of improper surface preparation. Sponge Blasting allows professionals to achieve optimum surface preparation, increase adhesion and extend coating life.

The dry, low dust, no ricochet characteristics of Sponge Media provides the freedom to specify a perfect white metal blast in all areas where:

  • Power tools are required
  • Electrical or rotating equipment is present
  • Adjacent surfaces can be damaged from ricochet
  • Visibility during blasting is desired

Testimonials

"Sponge Jet enabled us to acquire a blasting permit from the state of TX and locally, in an area we otherwise would have been unable to get one. By being able to blast on site we are able to better control our production and are seeing quicker turn around through the paint shop. The low dust and ability to recycle the media has made this a good solution for us." - Brian Henslee, TESMEC S.p.A


Related Resources

  • Chloride Removal Paper

    PDF white paper compares dry abrasive blasting with pliant abrasive blasting, focusing on chloride r…

    Download
  • Dow Chemical In Process Cleaning

    In this PDF magazine article, a Dow Chemical manufacturing facility saved money and downtime by swit…

    Download
  • Paint Removal in Manufacturing Plant

    PDF describes case history of Sponge-Jet low dust coatings removal inside robotics plant containing …

    Download
  • Sponge-Based Technology Can Cut Cleaning Downtime

    PDF article describes abrasive-blast airborne dust problem encountered at manufacturing facilities.

    Download

Recent Blog Posts

  • Ornamental Tin Ceiling Restoration Project at St. Mark's Church

    Located along the main road of Steeleville, Illinois (USA), sits a charming Lutheran Church called St. Mark’s. Surrounded by both homes and businesses in the center of the small town, the Church is a well-known landmark in the community. Prior to a recent renovation, the staff at St Mark's noticed that much of the white paint was peeling off of this decorative ceiling, leaving areas of exposed tin.

    Läs mer >
  • 4 Reasons Why You Should Care About Surface Prep

    Painting a surface might seem like a straightforward task, but the key to a long-lasting and visually appealing finish lies in surface preparation. Whether you're dealing with metal or concrete, investing time and effort in preparing the surface before applying paint is essential.

    Läs mer >
Fler inlägg